What’s an Interim Final Rule?
An interim final rule is issued when an agency feels that the rule is important enough to take effect immediately. It goes into effect when published or when the published effective date occurs. In this case, the interim rule takes effect on Monday, 2/25/19. Public comment is invited until March 15, and the final rule may change based on the comments received.
Section 48, subpart C, registration and marking requirements for small unmanned aircraft, will change. The current rule allows fliers to put the identifier inside a compartment, as long as someone can open the compartment without a tool.
§48.205 Display and location of unique identifier.
(a) The unique identifier must be maintained in a condition that is legible.
(b) The unique identifier must be affixed to the small unmanned aircraft by any means necessary to ensure that it will remain affixed for the duration of each operation.
(c) The unique identifier must be readily accessible and visible upon inspection of the small unmanned aircraft. A unique identifier enclosed in a compartment is readily accessible if it can be accessed without the use of any tool.
Rule as of February 25, 2019
The FAA wants to increase safety for first responders and others who may need to check over an unmanned aircraft. Therefore, the interim final rule now reads: “(c) The unique identifier must be legibly displayed on an external surface of the small unmanned aircraft.“ This revision will enable anyone to view the ID without having to pick up the drone or open any closed compartments.
IDMyStuff® Can Help
With three lines, you have room for your FAA identifier, plus your name and an email or phone number. You can take care of the governmental requirements – and make sure your craft is marked so it can easily be returned to you if it’s lost. The kit has enough labels that you can tag the battery packs, the remote, the case, and other items, too.
IDmyStuff labels come in a dozen colors, including black (with white lettering) and white (black lettering). They’re only $9.95 for 29 labels. It just makes sense to label your drone with these ID labels even if you don’t need an FAA number!
Comments will be accepted at https://www.regulations.gov/docket?D=FAA-2018-1084 until March 15, 2019.