Permanent adhesive is a versatile, general purpose adhesive designed for excellent adhesion to corrugated materials and good adhesion to plastics. Excellent initial tack, emulsion acrylic adhesive. Minimum application temperature is +25 degrees Fahrenheit; service range temperature is -65 degrees to +200 degrees Fahrenheit.

All Temperature adhesive is also an emulsion acrylic adhesive that provides wide range temperature performance and excellent cold temperature performance without sacrificing tight die cutting and stripping properties. Meets FDA requirements for indirect food contact. Minimum application temperature is -20 degrees Fahrenheit; service range temperature is -65 degrees to +200 degrees Fahrenheit.

Removable adhesive is available on EDP face material, only. Removable adhesive will detach from the back of the label in one piece leaving little or no adhesive residue. Usually a removable adhesive is recommended when a label has a short-term life or is applied to a surface that could be damaged by the adhesive. Our adhesive has a high initial tack and removes cleanly from most surfaces. It is FDA compliant for indirect food contact.

Materials: Label Face Materials

EDP (Standard smudge proof label stock originally meaning electronic data processing, EDP) Common Applications: Standard and most commonly used label material. Used for mailing labels, shipping labels and carton labels. Characteristics: Bright white uncoated paper. Excellent smudge resistance.Adhesive: Three different types: permanent, removable, all temperature.Weight: 50/50 (50# face stock w/ adhesive/ 50#liner)

Thermal Transfer (for ribbon based label printers)Common Applications: High density bar coded label applications, shipping labels. Characteristics: Bright white coated paper. Ultra smooth.Adhesive: Permanent. Weight: 55/40. (50# face stock w/ adhesive/40# liner)

Direct Thermal (for printers that apply heat to specially coated labels.) Common Applications: Meat markets, hospitals. Characteristics: Smooth bright white paper. High sensitivity thermal coating. Adhesive: All temperature. Weight: 60/40. (60# face stock w/ adhesive/ 40# liner)

Matte Litho Common Applications: Higher quality label for shipping, mailing or carton applications.Characteristics: Dull white matte coated paper.Adhesive: Permanent. Weight: 60/40. (60# face stock w/ adhesive/40# liner)

High-Gloss Common Applications: High quality labels, product ID labels.Characteristics: Bright blue-white cast-coated paper. Adhesive: Permanent. Weight: 55/40. (55# face stock w/ adhesive/40# liner)

Semi-Gloss Common Applications: Used when the need arises for a high quality of print is critical. Applications could include product identification labels, advertising of specialty products, or special event or special occasion labels.Characteristics: Super-calendered, white lightweight coated facestock.Adhesive: Permanent. Weight: 60/40. (60# face stock w/ adhesive/40# liner)

Fluorescent Common Applications: Red, orange, pink, chartreuse and green colors used to draw attention to label.Characteristics: Matte fluorescent paper in colors listed above.Adhesive: Permanent. Weight: 60/40. (60# face stock w/ adhesive/40# liner)

Silver / Gold Foil Common Applications: A premium finish metalized paper. Applications could include specialty address label, and also any product identifier in which you would want to make a special impression.Characteristics: Bright silver or gold foil.Adhesive: Permanent. Weight: 59/40. (59# face stock w/ adhesive/40# liner)

Primax White Film / Fasclear Film Common Applications: Main application is prime label applications, product identifiers, and specialty labels for special events. Characteristics: Primax® white polyolifyn or Fasclear® matte-clear polyolifyn, water resistant. Adhesive: Permanent. Weight: 59/40. (59# face stock w/ adhesive/50# liner)

Matte Litho Opaque Common applications: Used to block out/cover up information. Cannot be seen through. Non transparent.Characteristics: Matte litho stock.Adhesive: Permanent. Weight: 50/50 (50# face stock w/ adhesive/ 50# liner)

Kimdura® Smudge Proof Common applications: Used when water resistance is a requirement. Tear resistant.Characteristics: Smudge proof, smooth matte-like finish. Adhesive: Permanent. Weight: 80/50 80# face stock w/ adhesive/ 50# liner)

Colors: Available Material Colors White matte litho, white high gloss, white semi-gloss, red fluorescent, orange fluorescent, pink fluorescent, chartreuse fluorescent, green fluorescent, bright gold foil, bright silver foil, flexible white poly film, flexible clear poly film. Not all materials are available in all colors. See materials section for details.

Colors: Available Ink Colors These are not four color, process color, CYMK labels (four color process coming soon)

Standard Ink Colors: Black, white (film only), reflex blue, process blue, 300 blue, 201 maroon,rubine, rhodamine, 185 red, warm red, pantone green,347 green, pantone yellow, 165 orange, 470 brown, 464 brown, 429 gray, 424 gray, pantone purple, violet. See color chart below.

Non Standard Ink Colors: Use up to any four PMS colors not specified above.

Standard Ink Color Chart

	Black		Pantone Purple		Pantone Violet
	White (film only)		185 Red		464 Brown
	Reflex Blue		Warm Red		Gray 429
	Process Blue		Pantone Green		Gray 424
	300 Blue		347 Green
	201 Maroon		Pantone Yellow
	Rubine		165 Orange
	Rhodamine		470 Brown