|
|
Digital Short Run Label Materials
Before you get started reviewing the wide range of Digital ShortRun materials, here are a few things to consider:
Stretch Resistance is rated from 1 to 5 with 5 being the most resistant to deformation.
Digital Short Run Label Materials Categories You can jump immediately to any of the categories below by simply clicking on the appropriate link.
|
|
|
Whites
| Standard 4 mil Vinyl -Removable White |
| For Removable, White Labels. A 3.5 mil white calendered vinyl with a removable, pressure sensitive adhesive. For up to 6 months after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 6 month outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. |
Colors:
White |
Adhesive:
Removable |
Outdoor Rate:
6 Month |
Stretch Resist:
3 |
| Polyester 2 mil -Gloss White -U.L.® Recognized |
| Tough polyester resistant to heat, tearing, abrasion, and stretch. A 2 mil high gloss white polyester film, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 303 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Will accept any of our printing colors or foils, however, to maintain U.L. Recognition, contact us to make sure the printing resins are U.L. Recognized as well. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. UL Approved |
Colors:
Gloss White |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
5 |
| Standard 4 mil Vinyl -White |
| This is the place to start when choosing a label material. Economical and durable. A 3.5 mil polymeric calendered vinyl with a permanent, pressure sensitive adhesive. It has a 3-5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. This vinyl is a relatively inexpensive but effective solution for most labeling needs. It does not deform easily, but will still conform to moderately irregular surfaces. (For very irregular surfaces, use 2 mil premium vinyl.) Mildly translucent, so if you need opacity on a white label, use Block Out White Standard 4 mil Vinyl, or use one of the metalized materials and prime with white.) |
Colors:
Matte White
Semi-Gloss White |
Adhesive:
Permanent |
Outdoor Rate:
3-5 Year |
Stretch Resist:
3 |
| Standard 4 mil Vinyl -Block Out White |
| This material is perfect for applying labels to cover up or "block out" copy or graphics from the underlying surface. A 3.5 mil gray polymeric calendered vinyl with a white topcoat and a permanent, pressure sensitive adhesive. It has a 3-5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. (For very irregular surfaces, use 2 mil premium vinyl or convex vinyl, and prime with white printing.)
|
Colors:
Satin White |
Adhesive:
Permanent |
Outdoor Rate:
3-5 Year |
Stretch Resist:
3 |
| Premium 2 mil Vinyl -White |
| For Best Printing Quality and Thin Labels. A 2 mil cast vinyl with a permanent, pressure sensitive adhesive. This vinyl will produce optimum printing results, but since it is very thin it tends to stretch easily. It is good for irregular or corrugated surfaces, but must be handled carefully when applying to avoid stretch and bubbles. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. White is not very opaque and will show dark irregularities on surface it is mounted to. For opaque premium vinyl, use black and prime with white or double white flood coat. |
Colors:
White |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
2 |
| Glow-in-the-Dark Phosphorescent 2.4 mil Vinyl |
| Glow-in-the-Dark. A very unique 2.4 mil vinyl. Once exposed to natural or artificial light and black lighting, will glow the brightest during first 30 minutes after activation has ceased; will remain visible to the night adapted eye up to 10 hours. Will accept all of our printing colors and foils. Use for security and safety labels, light switches , phone dials, promotional items, fashion/trendy stickers, & more. |
Colors:
White |
Adhesive:
Permanent |
Outdoor Rate:
No |
Stretch Resist:
4 |
Reflective White 7.5 mil Vinyl
|
| Highly reflective white vinyl. 7.5 mil reflective sheeting, highly durable and conformable. For applications requiring high visibility, both day and night. For safety/warning labels, automotive/truck applications, bumper stickers. Use one of our "transparent" colors to maintain reflectivity through colors. Will accept all of our printing colors and foils. Conforms well to corrugated or moderately irregular surfaces. Back surface is silverized so material is very opaque. One of our longest lived outdoor vinyls. |
Colors:
White |
Adhesive:
Permanent |
Outdoor Rate:
7 Year |
Stretch Resist:
4 |
| Destructible Reflective White 7 mil Vinyl |
| Provides tamper resistant protection. Once applied, this reflective vinyl cannot be removed in one piece. Highly reflective white vinyl. 7 mil reflective sheeting,. For applications requiring high visibility, both day and night. For safety/warning labels, asset tags, or any application requiring tamper resistance. Use one of our "transparent" colors to maintain reflectivity through colors. Will accept all of our printing colors and foils. Conforms well to corrugated or moderately irregular surfaces. Back surface is silverized so material is very opaque. One of our longest lived outdoor vinyls. Conforms to Federal Spec. LS300C, Federal Hwy. FP-92, and ASTM Spec. D-4956-01a. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
7 Year |
Stretch Resist:
4 |
| Standard Magnetic 15 mil -White |
| Refrigerator Magnets, Specialty Magnets, Movable Labels. Flexible 15 mil magnetic vinyl with matte white surface. Perfect for flexible "refrigerator magnets", or moveable labeling on iron or steel surfaces. 12 magnetic poles per inch. (For automotive/truck applications, use Super Magnetic 24 mil.) It has a 5 year outdoor vertical surface rating, will not lose magnetic over time, and accepts all our printing colors and foils. |
Colors:
White |
Adhesive:
None |
Outdoor Rate:
5 Year |
Stretch Resist:
5 |
| Super Magnetic 24 mil -White |
| Automobile/Truck Magnets, Refrigerator Magnets, Specialty Magnets, Movable Labels. Flexible 24 mil magnetic vinyl with matte white surface. Perfect for temporary small signs/labels on cars/trucks, for flexible "refrigerator magnets" with greater magnetic strength than our standard magnetic material, or moveable labeling on iron or steel surfaces. 18 magnetic poles per inch It has a 5 year outdoor vertical surface rating, will not lose magnetic over time, and accepts all our printing colors and foils. |
Colors:
White |
Adhesive:
Permanent |
Outdoor Rate:
No |
Stretch Resist:
4 |
Standard 4 mil Vinyl -Removable White
|
| For Removable Labels. A 5 mil satin finish white vinyl with a removable, pressure sensitive adhesive. The adhesive is gray to increase opacity. For up to 2 years after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 2 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, and is best applied to flat surfaces. |
Colors:
White |
Adhesive:
Removable |
Outdoor Rate:
2 Year |
Stretch Resist:
3 |
Static Cling 7.5 mil Vinyl -White
|
| A 7.5 mil highly plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use. Window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our printing colors with the exception of Gold Foil and Silver Foil. White static cling can be used on the face of television monitors and other smooth surfaces. Use Clear Static Cling for "read-through-glass" decals (mirror image printing). |
Colors:
White
Clear |
Adhesive:
None |
Outdoor Rate:
No |
Stretch Resist:
3 |
Clears
Standard 4 mil Vinyl -Clear
|
| This is the place to start for clear decals. A 3.5 mil clear calendered vinyl with a clear permanent, pressure sensitive adhesive. It has a 2 year outdoor vertical surface durability rating (for longer life, use clear 2 mil premium vinyl), and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. (For very irregular surfaces, use 2 mil premium clear vinyl.) Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
3 |
Standard 4 mil Vinyl Removable Clear
|
| For Removable, Clear Decals. A 3.5 mil clear calendered vinyl with a clear removable, pressure sensitive adhesive. For up to 6 months after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 6 month outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Removable |
Outdoor Rate:
6 Month |
Stretch Resist:
3 |
Premium 2 mil Vinyl -Clear
|
| For Best Printing Quality and Thin Labels. A 2 mil cast vinyl with a permanent, pressure sensitive adhesive. This vinyl will produce optimum printing results, but since it is very thin it tends to stretch easily. It is good for irregular or corrugated surfaces, but must be handled carefully when applying to avoid stretch and bubbles. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
2 |
Standard 4 mil Vinyl -Removable Clear
|
| For Removable, Clear Decals. A 3.5 mil clear calendered vinyl with a clear removable, pressure sensitive adhesive. For up to 6 months after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 6 month outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Removable |
Outdoor Rate:
6 Month |
Stretch Resist:
3 |
Convex 4 mil Vinyl -Clear
|
| For adhering and conforming to complex convex curved surface like helmets or hard hats. A unique 4 mil vinyl designed to adhere to convex or rounded surfaces. Use for football helmet emblems or logos & warnings on hard hats. Will accept all of our printing colors. By laminating after printing with a second layer of this material one can achieve a substantial and very durable emblem for applications like football helmets. Unless placing on white surface, certain translucent colors may need to be primed with white undercoat to achieve color rendition. We stock 4 mil clear and 4 mil white. 8 mil clear and 8 mil white are available for special orders. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
No |
Stretch Resist:
4 |
Static Cling 7.5 mil Vinyl -Clear
|
| A 7.5 mil highly plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use. Window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our printing colors with the exception of Gold Foil and Silver Foil. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass; will generally need white as a backup printing color if creating decal to be read through glass. |
Colors:
Clear
White |
Adhesive:
None |
Outdoor Rate:
No |
Stretch Resist:
3 |
| Polyester 1 mil -Clear -U.L.® Recognized |
| Tough polyester resistant to heat, tearing, abrasion, and stretch. A 1 mil gloss clear polyester film, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 257 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the printing resins are U.L. Recognized as well. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. 1 mil is very thin film; it is easier to handle to 2 mil clear polyester. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
5 |
| Polyester 2 mil -Clear -U.L.® Recognized |
| Tough polyester resistant to heat, tearing, abrasion, and stretch. A 2 mil gloss clear polyester film, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 303 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the printing resins are U.L. Recognized as well. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
2 |
| Lexan® 10 mil -Clear |
| Nameplates, Membrane Switchpads, Control Panels, and more. Semi-rigid, clear 10 mil Lexan® (polycarbonate), with a lustrous velvet finish on the top surface. Material will be printed on the bottom side (subsurface printing), providing maximum protection to the printed image once adhered to application surface. Most applications require a flood coat of white as last layer to maintain color rendition of top colors. Accepts all our printing colors, except Gold or Silver Medal Foil. Outdoor exposure may cause yellowing of polycarbonate, so must be considered for outdoor use. Specify laminating adhesive if peel and stick adhesive is required (thin for smooth, thick for slightly rough or uneven surfaces). |
Colors:
2 |
Adhesive:
None
Must Be Applied |
Outdoor Rate:
No |
Stretch Resist:
5 |
LexSaver™ Overlaminate - Substrate Combination
|
| Lexsaver® is not actually a printable substrate, but rather our unique process of combining a 5 mil velvet Lexan® overlaminate with any of our standard substrates. The most common substrate is 2 mil white polyester, and when used in place of Subsurface Printed Lexan®, a control panel or nameplate produced with the LexSaver™ process can be more economical for jobs which would otherwise require a white floodcoat and which have a large number of internal cutouts.
|
Colors:
Velvet Overlam
over any substrate |
Adhesive:
N/A |
Outdoor Rate:
3-5 Year |
Stretch Resist:
5 |
Metallics
Premium 2 mil Vinyl -Champagne Metallic Gold
|
| For Best Printing Quality and Thin Labels. A 2 mil cast vinyl with a permanent, pressure sensitive adhesive. This vinyl will produce optimum printing results, but since it is very thin it tends to stretch easily. It is good for irregular or corrugated surfaces, but must be handled carefully when applying to avoid stretch and bubbles. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. When printing on colored vinyls, white must be printed as a primer to achieve standard color rendition. |
Colors:
Champagne
Metallic Gold |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
2 |
Premium 2 mil Vinyl -Metallic Gold & Silver
|
| For Best Printing Quality and Thin Labels. A 2 mil cast vinyl with a permanent, pressure sensitive adhesive. This vinyl will produce optimum printing results, but since it is very thin it tends to stretch easily. It is good for irregular or corrugated surfaces, but must be handled carefully when applying to avoid stretch and bubbles. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. When printing on colored vinyls, white must be printed as a primer to achieve standard color rendition. |
Colors:
Metallic Gold
Metallic Silver |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
2 |
Super High Gloss 3 mil Silver Foil Vinyl
|
| For the ultimate mirror silver finish. Durable, dimensionally stable, flexible cast vinyl with a mirror finish. Adhesive is clear and permanent, so vinyl appears high gloss silver on both sides; when applied to glass, back of label will be seen as high gloss silver through the glass. If you need top quality printing results, extended outdoor durability, and the super mirror silver finish, this is the right material. Not for corrugated or highly irregular surfaces. For less expensive gloss silver, see Shiny Silver 2 mil Polyester. |
Colors:
High Gloss
Silver |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
3 |
Shiny Silver Foil 2 mil Polyester
|
| High gloss silver polyester foil. A 2 mil silver mirror finish polyester film, great for nameplates, product labelling, and other distinctive labels. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Metalized polyester film, great for nameplates, product labelling, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 303 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Adhesive is one of the best available for Low Surface Energy (LSE) plastics. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the colors you choose are U.L. Recognized as well. When printing on colored materials, white must be printed as a primer to achieve standard color rendition; silver tone will also change color tone of less opaque colors. Because it is metalized, this polyester will conduct electricity and is not suitable for the backs of printed circuit boards where label is applied over electrical contacts. A more economical way to achieve silver mirror finish than Super High Gloss 3 mil Silver Foil Vinyl. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
5 |
Super High Gloss 3 mil Silver Foil Vinyl
|
| Matte Silver Finish. Tough polyester resistant to heat, tearing,abrasion, and stretch. A 2 mil silver metalized polyester film, great for nameplates, product labelling, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 303 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Adhesive is one of the best available for Low Surface Energy (LSE) plastics. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the colors you choose are U.L. Recognized as well. When printing on colored materials, white must be printed as a primer to achieve standard color rendition; silver tone will also change color tone of less opaque colors. Because it is metalized, this polyester will conduct electricity and is not suitable for the backs of printed circuit boards where label is applied over electrical contacts. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
5 |
Shiny Gold Foil 2 mil Polyester
|
| High gloss gold polyester foil. A 2 mil gold mirror finish polyester film, great for nameplates, product labeling, and other distinctive labels. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils. When printing on colored materials, white must be printed as a primer to achieve standard color rendition. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
No |
Stretch Resist:
5 |
| Polyester 2 mil -Metalized Matte Silver -U.L.® Recognized |
| Matte Silver Finish. Tough polyester resistant to heat, tearing, abrasion,
and stretch. A 2 mil silver metalized polyester film, great for asset tags, nameplates, product labelling,
particularly well suited to industrial applications where label may be subjected to physical
stress or heat. Depending on surface applied to, heat resistance ranges up to 303 degrees F.
(Contact us for exact specifications on your application.) 2 year outdoor vertical surface
rating. Adhesive is one of the best available for Low Surface Energy (LSE) plastics. Best for
very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of
our printing colors or foils, however to maintain U.L. Recognition, contact us to make
sure the resin colors you choose are U.L Recognized as well. When printing on colored
materials, white must be printed as a primer to achieve standard color rendition; silver
tone will also change color tone of less opaque colors. Because it is metallized, this
polyester will conduct electricity and is not suitable for the backs of
printed circuit boards where label is applied over electrical contacts.
|
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
5 |
| Polyester 2 mil -Brushed Gold -U.L.® Recognized |
| Brushed metal look; Tough polyester resistant to heat, tearing, abrasion, and stretch. A 2 mil brushed gold polyester film, great for nameplates, product labelling, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 257 degrees F. (Contact us for exact specifications on your application.) Not recommended for outdoor use. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the colors you choose are U.L Recognized as well. When printing on colored materials, white must be printed as a primer to achieve standard color rendition; brushed appearance will show through "transparent" colors, but gold tone will also change color tone of less opaque colors. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
No |
Stretch Resist:
5 |
| Security Silver 2 mil Void Polyester |
| Provides tamper evident protection. (Also see Destructible Reflective 7 mil Vinyl.) A 2 mil silver mirror finish polyester film, with a unique adhesive system. Once printed and applied, the word VOID appears, on both the applied surface and the material, if the label is removed. The removed label cannot be reapplied. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils. When printing on colored materials, white must be printed as a primer to achieve standard color rendition. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
4 |
| Polyester 2 mil -Brushed Silver -U.L.® Recognized |
| Brushed metal look; Tough polyester resistant to heat, tearing, abrasion, and stretch. A 2 mil brushed silver polyester film, great for nameplates, product labeling, particularly well suited to industrial applications where label may be subjected to physical stress or heat. Depending on surface applied to, heat resistance ranges up to 257 degrees F. (Contact us for exact specifications on your application.) 2 year outdoor vertical surface rating. Best for very flat, smooth surfaces as it will not conform to uneven surfaces. Will accept any of our printing colors or foils, however to maintain U.L. Recognition, contact us to make sure the colors you choose are U.L Recognized as well. When printing on colored materials, white must be printed as a primer to achieve standard color rendition; brushed appearance will show through "transparent" colors, but silver tone will also change color tone of less opaque colors. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
4 Year |
Stretch Resist:
5 |
Colored Vinyls
| Standard 4 mil Vinyl Colors |
| A 3.6 mil polymeric calendered vinyl with a permanent, pressure sensitive adhesive. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. This vinyl is a relatively inexpensive but effective solution for most labelling needs. It does not deform easily, but will still conform to moderately irregular surfaces. (For very irregular surfaces, use 2 mil premium vinyl.) When printing on colored vinyls, white must be printed as a primer to achieve standard color rendition. |
Colors:
Matte Black
Semi-Gloss Yellow |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
3 |
| Premium 2 mil Vinyl -Colors |
| For Best Printing Quality and Thin Labels. A 2 mil cast vinyl with a permanent, pressure sensitive adhesive. This vinyl will produce optimum printing results, but since it is very thin it tends to stretch easily. It is good for irregular or corrugated surfaces, but must be handled carefully when applying to avoid stretch and bubbles. It has a 5 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. White is not very opaque and will show dark irregularities on surface it is mounted to. |
Colors:
Matte Black
Gloss Black |
Adhesive:
Permanent |
Outdoor Rate:
5 |
Stretch Resist:
2 |
| Fluorescent 4 mil Vinyl |
| Fluorescent eye catching colors. 4 mil cast vinyls with attention-getting visibility under normal or low light conditions. Great for point of purchase stickers, window graphics, and safety/warning labels. Orange meets OSHA standards. Lime Green meets Coast Guard standards. Will accept all of our printing colors and foils. When printing on colored vinyls, white must be printed as a primer to achieve standard color rendition. |
Colors:
Lime Green
Orange, Yellow |
Adhesive:
Permanent |
Outdoor Rate:
1 Year |
Stretch Resist:
3 |
| Standard 4 mil Vinyl -Removable White |
| For Removable Labels. A 5 mil satin finish white vinyl with a removable, pressure sensitive adhesive. The adhesive is gray to increase opacity. For up to 2 years after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 2 year outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, and is best applied to flat surfaces. |
Colors:
2 |
Adhesive:
Removable |
Outdoor Rate:
2 Year |
Stretch Resist:
3 |
| Standard 4 mil Vinyl -Removable Clear |
| For Removable, Clear Decals. A 3.5 mil clear calendered vinyl with a clear removable, pressure sensitive adhesive. For up to 6 months after application, decals can be removed from most surfaces with little or no residue and without the aid of chemicals or tools. It has a 6 month outdoor vertical surface durability rating, and accepts all of our printing colors and foils. It does not deform easily, but will still conform to moderately irregular surfaces. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
2 Year |
Stretch Resist:
3 |
| Static Cling 7.5 mil Vinyl |
| A 7.5 mil highly plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use. Window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our printing colors with the exception of Gold Foil and Silver Foil. Specify Reverse Printing if you want decals to read correctly when applied to and read through glass; will generally need white as a backup printing color if creating decal to be read through glass. |
Colors:
Clear,
White |
Adhesive:
None |
Outdoor Rate:
No |
Stretch Resist:
3 |
Removables or No Adhesive
| PVC 10 mil Plastic Sheet -White |
| Door & Review Mirror Hangers, Menu Boards, Tent Cards, and more.Semi-rigid, white 10 mil PVC (polyvinyl chloride) for use with non-pressure-sensitive, interior and exterior opaque applications. Use for permits, identification tags, door hangers, etc. Can be score cut for easy folding (e.g. tent cards). Accepts all our printing colors, except Gold or Silver Medal Foil. Has a one year outdoor exposure rating, however it is not recommended for horizontal applications outdoors. |
Colors:
2 |
Adhesive:
None |
Outdoor Rate:
1 Year |
Stretch Resist:
5 |
| Standard 4 mil Vinyl -Removable Clear |
| Nameplates, Membrane Switchpads, Control Panels, and more. Semi-rigid, clear 10 mil Lexan (polycarbonate), with a lustrous velvet finish on the top surface. Material will be printed on the bottom side (subsurface printing), providing maximum protection to the printed image once adhered to application surface. Most applications require a flood coat of white as last layer to maintain color rendition of top colors. Accepts all our printing colors, except Gold or Silver Medal Foil. Outdoor exposure may cause yellowing of polycarbonate, so must be considered for outdoor use. Specify laminating adhesive if peel and stick adhesive is required (thin for smooth, thick for slightly rough or uneven surfaces). |
Colors:
2 |
Adhesive:
Removable |
Outdoor Rate:
6 Month |
Stretch Resist:
3 |
| Lexan® 10 mil -Clear |
| Nameplates, Membrane Switchpads, Control Panels, and more. Semi-rigid, clear 10 mil Lexan® (polycarbonate), with a lustrous velvet finish on the top surface. Material will be printed on the bottom side (subsurface printing), providing maximum protection to the printed image once adhered to application surface. Most applications require a flood coat of white as last layer to maintain color rendition of top colors. Accepts all our printing colors, except Gold or Silver Medal Foil. Outdoor exposure may cause yellowing of polycarbonate, so must be considered for outdoor use. Specify laminating adhesive if peel and stick adhesive is required (thin for smooth, thick for slightly rough or uneven surfaces). |
Colors:
2 |
Adhesive:
None (must
be applied) |
Outdoor Rate:
6 Month |
Stretch Resist:
3 |
| Static Cling 7.5 mil Vinyl -White |
| A 7.5 mil highly plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use. Window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our printing colors with the exception of Gold Foil and Silver Foil. White static cling can be used on the face of television monitors and other smooth surfaces. Use Clear Static Cling for "read-through-glass" decals (mirror image printing). |
Colors:
White,
Clear |
Adhesive:
None |
Outdoor Rate:
No |
Stretch Resist:
3 |
High Visibility or Low Light
| Glow-in-the-Dark Phosphorescent 2.4 mil Vinyl |
| Glow-in-the-Dark. A very unique 2.4 mil vinyl. Once exposed to natural or artificial light and black lighting, will glow the brightest during first 30 minutes after activation has ceased; will remain visible to the night adapted eye up to 10 hours. Will accept all of our printing colors and foils. Use for security and safety labels, light switches, phone dials, promotional items, fashion/trendy stickers, & more. |
Colors:
2 |
Adhesive:
None |
Outdoor Rate:
No |
Stretch Resist:
4 |
| Reflective White 7.5 mil Vinyl |
| Highly reflective white vinyl. 7.5 mil reflective sheeting, highly durable and conformable. For applications requiring high visibility, both day and night. For safety/warning labels, automotive/truck applications, bumper stickers. Use one of our "transparent" colors to maintain reflectivity through colors. Will accept all of our printing colors and foils. Conforms well to corrugated or moderately irregular surfaces. Back surface is silverized so material is very opaque. One of our longest lived outdoor vinyls. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
7 Year |
Stretch Resist:
4 |
| Destructible Reflective White 7 mil Vinyl |
| Provides tamper resistant protection. Once applied, this reflective vinyl cannot be removed in one piece. Highly reflective white vinyl. 7 mil reflective sheeting,. For applications requiring high visibility, both day and night. For safety/warning labels, asset tags, or any application requiring tamper resistance. Use one of our "transparent" colors to maintain reflectivity through colors. Will accept all of our printing colors and foils. Conforms well to corrugated or moderately irregular surfaces. Back surface is silverized so material is very opaque. One of our longest lived outdoor vinyls. Conforms to Federal Spec. LS300C, Federal Hwy. FP-92, and ASTM Spec. D-4956-01a. |
Colors:
2 |
Adhesive:
Permanent |
Outdoor Rate:
7 Year |
Stretch Resist:
4 |
| Fluorescent 4 mil Vinyl |
| Fluorescent eye catching colors. 4 mil cast vinyl with attention-getting visibility under normal or low light conditions. Great for point of purchase stickers, window graphics, and safety/warning labels. Orange meets OSHA standards. Lime Green meets Coast Guard standards. Will accept all of our printing colors and foils. When printing on colored vinyls, white must be printed as a primer to achieve standard color rendition. |
Colors:
Lime Green,
Yellow, Orange |
Adhesive:
Permanent |
Outdoor Rate:
1 Year |
Stretch Resist:
3 |
Aluminums
| 3-mil Flexible Anodized Aluminum Foil |
| Tough Flexible Anodized Aluminium perfect for asset labels and tags that need to be adhered on a curved surface. The colors and graphics are etched permanently into the surface of the material. This highly durable product means labels can be used indoors or outdoors. This is the material we recommend if your labels will be exposed to direct sunlight, salt spray, high temperatures, cleaning solvents, or continuous abrasion. Made specifically for these conditions, it will not crack, chip, or peel over its useful life. |
Colors:
Matte Silver |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
5 |
| 8-mil Anodized Metal |
| Tough Anodized Aluminium perfect for asset labels and tags that need extra durability. The colors and graphics are etched permanently into the surface of the material. This highly durable product means labels can be used indoors or outdoors. This is the material we recommend if your labels will be exposed to direct sunlight, salt spray, high temperatures, cleaning solvents, or continuous abrasion. Made specifically for these conditions, it will not crack, chip, or peel over its useful life. |
Colors:
Matte Silver |
Adhesive:
Permanent |
Outdoor Rate:
5 Year |
Stretch Resist:
5 |
|
Presize Roll and Fanfold Label Materials
Before you get started reviewing the wide range of Presize Roll and Fanfold label materials, here are a few things to consider:
Roll and Fanfold Materials Categories You can jump immediately to any of the categories below by simply clicking on the appropriate link.
|
|
|
Whites
EDP
|
| Standard smudge proof label stock, originally meaning electronic data processing, EDP. Most commonly used label material. Used for mailing labels, shipping labels and carton labels. Bright white uncoated paper. Excellent smudge resistance. Available with three different types: permanent, removable, all temperature. 50# face stock w/ adhesive/ 50#liner. |
Colors:
2 |
Adhesive:
Permanent
Removable
All Temperature |
Stock:
Uncoated |
Weight:
50# Face
50# Liner |
Thermal Transfer
|
| Thermal transfer label material used with ribbon based label printers. Most commonly used label material. Used for High density bar coded label applications, shipping labels. Bright white coated paper. Ultra smooth. Permanent adhesive. 55# face stock (includes 5# adhesive) / 40#liner. |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Coated-Ultra
Smooth |
Weight:
55# Face
40# Liner |
Direct Thermal
|
| Direct thermal label material used with printers that apply heat to specially coated labels. Great for meat markets, hospitals. Smooth bright white paper. High sensitivity thermal coating. All temperature adhesive. 60# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent
All Temperature |
Stock:
Coated Smooth |
Weight:
60# Face
40# Liner |
Matte Litho
|
| Matte litho label material is common, higher quality label material. Often used for shipping, mailing or carton applications. Dull white matte-coated paper. Permanent adhesive. 60# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Coated-Matte |
Weight:
60# Face
40# Liner |
High Gloss
|
| High gloss label material is ultra high quality label material. Often used for product ID applications. Bright blue-white cast-coated paper. Permanent adhesive. 55# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Cast Coated |
Weight:
55# Face
40# Liner |
Semi-Gloss
|
| Semi-gloss label stock. Used when the need arises for a high quality of print is critical. Applications could include product identification labels, advertising of specialty products, or special event or special occasion labels. Super-calendered, white lightweight coated face stock. Permanent adhesive. 60# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent
Removable
All Temperature |
Stock:
Calendered-Coated |
Weight:
60# Face
40# Liner |
Primax® White Film
|
| Primax® white film. Main application is for use in prime label applications, product identifiers, and specialty labels for special events. Primax® white polyolifyn film. Permanent adhesive. 59# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Poliolifyn Film |
Weight:
59# Face
40# Liner |
| Matte Litho Opaque-White |
| Non transparent, white, completely opaque material. Main application is to block out/cover up information. Permanent adhesive. Weight: 50/50 (50# face stock w/ adhesive/ 50# liner) |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Matte Litho |
Weight:
50# Face
50# Liner |
| Kimdura-White |
| Smudge proof, white matte-like material. Used when water resistance is a requirement. Permanent adhesive. Weight: 80/50 (80# face stock w/ adhesive/ 50# liner) |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Kimdura |
Weight:
80# Face
50# Liner |
Fluorescents
| Silver or Gold Foil |
| Fluorescent red, orange, pink, chartreuse and green label material. Primarily used to draw attention to the label or the message printed on the label. Matte fluorescent paper. Permanent adhesive. 60# face stock / 40# liner. |
Colors:
Red, orange
pink, green
chartreuse |
Adhesive:
Permanent |
Stock:
Metalized Paper |
Weight:
59# Face
40# Liner |
Foils
| Silver or Gold Foil |
| Silver or gold foil label material is a premium finish metalized paper. Common applications include specialty address labels, and any product identifier in which you would want to make a special impression. Bright silver or gold metalized paper. Permanent adhesive. 59# face stock / 40# liner. |
Colors:
2 |
Adhesive:
Permanent |
Stock:
Metalized Paper |
Weight:
59# Face
40# Liner |
Poly Films
| Primax® White Film/Fasclear® Film |
| Primax® white film or Fasclear® film. Used almost exclusively in prime label applications for product identifiers, and specialty labels for special events. Primax® white polyolifyn film or Fasclear® matte-clear ployolifyn. Permanent adhesive. 59# face stock / 40#liner). |
Colors:
White
Matte-Clear |
Adhesive:
Permanent |
Stock:
Polyolifyn Film |
Weight:
60# Face
40# Liner |
|
Process Color Label Materials
Please review the available Process Color Label materials, below:
Process Color Materials Categories You can jump immediately to any of the categories below by simply clicking on the appropriate link.
|
|
|
Whites
| High Gloss-White |
| High quality paper label material. Often used for product ID applications. Application temp:-20 degree F minimum Service temp:-65 degree F to +200 degree F Not recommended as a writing surface. Smooth, 60#, coated-one-side, super-calendared kraftstock. Permanent adhesive. 4.0 mils face stock / 2.7 mils liner. |
Colors:
Bright White |
Adhesive:
Permanent |
Stock:
Gloss Paper |
Weight:
4.0 Mils Face
6.7 Mils Total |
| Kimdura® Film-White |
| White, top-coated, film. Main application is for use in prime label applications, product identifiers, and specialty labels for special events. Suitable for indoor or outdoor use.Application temp: +45 degree F minimum. Service temp:-65 degrees F to +200 degrees F. white polyolefin Permanent adhesive. 3.7 mils face stock / 4.1 mils liner. |
Colors:
White |
Adhesive:
Permanent |
Stock:
polyolefin Film |
Weight:
3.7 Mils Face
7.8 Mils Total |
| Static Cling-White |
| Plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use only. Used for window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our inks with the exception of Gold Foil and Silver Foil. |
Colors:
White |
Adhesive:
None |
Stock:
Vinyl |
Weight:
6.0 Mils Face
10.0 Mils Total |
Clears
| Ultra-clear Film |
| Ultra-clear, top-coated, white film. Main application is for use in prime label applications, product identifiers, and specialty labels for special events. Application temp: +10 degree F minimum Service temp: -40 degree F to +200 degree F. Ultra-clear white polyolefyn semi-conformable film. Permanent adhesive. 2.0 mils face stock / 4.1 mils liner. |
Colors:
Clear |
Adhesive:
Permanent |
Stock:
Film |
Weight:
2.0 Mils Face
6.1 Mils Total |
| Static Cling-Clear |
| Plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use only. Used for window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our inks with the exception of Gold Foil and Silver Foil. Use Clear Static Cling for "read-through-glass" decals (mirror image printing). |
Colors:
Clear |
Adhesive:
None |
Stock:
Vinyl |
Weight:
6.0 Face
13.7 Mils Total |
|
Bumper Sticker Materials
Our bumper stickers are printed on durable white vinyl -not paper with UV protective varnish applied FREE -on every order! That means your bumper stickers will look new longer, at no extra charge!
|
|
|
| Standard Bumper Sticker Vinyl -White |
| Calendered white vinyl with a permanent, pressure sensitive adhesive.It has a 3-5 year outdoor durability rating. Permanent adhesive. 60# face stock / 40# liner. |
Colors:
Matte White |
Adhesive:
Permanent |
Stock:
Vinyl |
Weight:
60# Face
40# Liner |
| Repositionable Vinyl - Yellow |
| Calendered yellow vinyl with a repositionable, pressure sensitive adhesive.It has a 3-5 year outdoor durability rating. Permanent adhesive. 60# face stock / 40# liner. |
Colors:
Yellow |
Adhesive:
Pressure Sensitive |
Stock:
Vinyl |
Weight:
60# Face
40# Liner |
| Static Cling - White |
| Plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use only. Used for window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our inks with the exception of Gold Foil and Silver Foil. |
Colors:
White |
Adhesive:
None |
Stock:
Vinyl |
Weight:
6.0 Mils Face
10.0 Mils Total |
| Static Cling - Clear |
| Plasticized vinyl film designed to adhere to glass and other clean, smooth non-porous surfaces. For interior use only. Used for window and automotive window decals, without adhesive residue. Can be moved or repositioned after application. Will accept all of our inks with the exception of Gold Foil and Silver Foil. Use Clear Static Cling for "read-through-glass" decals (mirror image printing). |
Colors:
Clear |
Adhesive:
None |
Stock:
Vinyl |
Weight:
6.0 Face
13.7 Mils Total |
| Poly Ultra Removable - Clear |
| Plasticized vinyl can be used just like static cling but can be put on more materials including plastics, paints, paper, cartons, etc. The ultra removable adhesive is water based, adaptable to many surfaces with a minimum application temperature of 20° F and a service range of -20° F to 250° F. |
Colors:
Clear |
Adhesive:
Removable |
Stock:
Vinyl |
Weight:
60# Face
40# Liner |
|
Stock Labels and Cards Materials
Please review the available Stock Labels and Cards materials, below:
Stock Labels and Cards Materials Categories You can jump immediately to any of the categories below by simply clicking on the appropriate link.
|
|
|
Whites
| Inkjet/Laser Compatible -White Matte |
| This stock label material is compatible with both laser and inkjet printers. Used for address and shipping labels, media labels, price stickers, carton labels, transcription labels and most general label purposes. Permanent adhesive. |
Colors:
Matte White |
Adhesive:
Permanent |
Stock:
Paper |
| Inkjet Compatible -White Gloss |
| This stock label material is compatible ONLY with inkjet printers. Not compatible with laser printers. Used for high quality label projects. Bright blue-white cast-coated paper. Permanent adhesive. |
Colors:
Gloss White |
Adhesive:
Permanent |
Stock:
Coated Paper |
| Direct Thermal -Bright White |
| Direct thermal label material used with printers that apply heat to specially coated labels. Great for meat markets, hospitals. Smooth bright white paper. High sensitivity thermal coating. All temperature adhesive. |
Colors:
Bright White |
Adhesive:
Permanent
All Temperature |
|
